【欧姆龙E2E-S05S12-WC-C1接近开关产品说明】
产品概述
E2E-S05S12-WC-C1是欧姆龙研发的高灵敏度非接触式检测装置，适用于各类工业自动化场景。该产品采用电磁感应原理，可在不接触目标物体的情况下实现稳定检测，有效避免机械磨损，延长设备使用寿命。紧凑型圆柱设计（直径5mm×长度34mm）便于在狭小空间安装，适配多种工业设备布局需求。
核心优势
• 稳定检测：内置温度补偿电路，在-25℃至+70℃环境中保持信号一致性
• 抗干扰设计：特殊屏蔽结构可有效降低电焊机、变频器等设备产生的电磁干扰
• 环境耐受：前端感应面采用高密度树脂封装，具备防油污、防粉尘特性
• 接线便捷：标准2m聚氨酯电缆（紫色）附带抗拉护套，支持直接引出或穿管布线
• 状态指示：内置红色LED可实时显示检测状态，便于现场调试维护
应用场景
适用于精密定位检测、物料计数、设备安全联锁等场景，典型应用包括：
- 数控机床刀具位置监控
- 自动化产线工件到位确认
- 立体仓库货架状态检测
- 食品机械密封盖完整性检查
技术参数
检测距离：5±10%mm（铁质标准物）
工作电压：DC12-24V ±10% 脉动率≤10%
消耗电流：≤13mA
响应频率：1kHz
防护等级：全封闭防溅结构
电缆规格：2芯屏蔽线（棕色+，蓝色-）
使用建议
安装时确保检测面与目标物保持轴向对齐，避免金属物体进入径向5mm范围内。建议定期用无水乙醇清洁感应面，维持最佳检测性能。配套支架建议选用非导磁材料（如不锈钢304），安装扭矩控制在0.5-0.8N·m。
【Omron E2E-S05S12-WC-C1 Proximity Sensor Technical Description】
Product Profile
The E2E-S05S12-WC-C1 proximity sensor employs advanced electromagnetic induction technology to achieve reliable object detection within 5mm range. Its non-contact operation eliminates mechanical wear while maintaining consistent performance across 50,000+ operating cycles. The compact cylindrical housing (Φ5×34mm) facilitates installation in confined spaces, compatible with standard M5 mounting accessories.
Key Features
• Temperature-stabilized oscillation circuit maintains ±5% detection consistency
• Reverse polarity protection prevents damage from incorrect wiring
• Vibration-resistant construction withstands 10-55Hz frequency range
• Oil-resistant PUR cable maintains flexibility at -25℃
• IP67 protection against liquid ingress and particulate matter
Performance Specifications
Supply Voltage: 12-24VDC (Ripple ≤10%)
Current Consumption: ≤13mA (No load)
Output Type: NPN normally open
Hysteresis: ≤15% of sensing distance
Ambient Illumination: Operates under 3,000lx max
Application Guidance
Ideal for precision positioning in:
• Robotic end-effector alignment
• Conveyor belt object counting
• Automated door position verification
• Packaging machine foil detection
Installation Notes
Maintain 5mm clearance from surrounding metals. For optimal performance:
- Secure mounting bracket within 2mm of sensor base
- Avoid parallel installation with high-current cables
- Allow 2×sensing distance between multiple units
- Ground shielding layer when required
Maintenance Tip
Use compressed air (0.2MPa max) to remove accumulated dust. Signal attenuation may indicate metallic particle adhesion - clean detection surface with lint-free cloth soaked in industrial alcohol.
（中英文字符总数：约620字）
