CHF01/CHF02 热通量变化传感器产品介绍
【中文版】
CHF01和CHF02系列热通量变化传感器是专为精确测量热传导过程中动态热流变化而设计的高灵敏度检测装置。该系列产品采用模块化设计理念，可广泛应用于建筑节能评估、工业设备热管理、地热研究及环境监测等多个领域，为热力学分析提供可靠数据支持。
在技术实现层面，传感器基于热电堆原理开发，通过复合型敏感元件捕捉微小的温度梯度变化。创新性的多层薄膜结构设计有效提升了信号采集效率，同时采用温度补偿算法确保测量结果不受环境温度波动影响。其扁平化外形结构（厚度<3.5mm）便于嵌入式安装，特别适合对空间要求严苛的应用场景。
产品配置智能信号处理单元，支持实时数据输出与历史趋势分析。测量范围覆盖0-±2000 W/m²，分辨率达到1 W/m²，响应时间小于5秒。防护等级达到IP65标准，可在-40℃至+85℃的宽温域环境下稳定工作，适应室内外多种复杂工况。
应用场景包括但不限于：建筑围护结构热工性能检测、工业管道保温效果评估、新能源系统热交换效率分析等。配套的校准装置可帮助用户实现现场标定，结合数字化管理平台实现远程监控功能。该系列产品在保证测量精度的同时，通过优化生产工艺显著提升了设备耐久性，平均无故障工作时间超过30000小时。
【English Version】
CHF01/CHF02 Heat Flux Variation Sensors
The CHF01 and CHF02 series heat flux variation sensors are high-sensitivity detection devices specifically engineered for accurate measurement of dynamic thermal flow changes during heat transfer processes. Featuring modular design principles, this product family finds extensive application in building energy efficiency evaluation, industrial equipment thermal management, geothermal research, and environmental monitoring, delivering reliable data support for thermodynamic analysis.
Technologically, the sensors employ thermopile principles to capture subtle temperature gradient variations through composite sensing elements. An innovative multi-layer thin-film structure design enhances signal acquisition efficiency, while temperature compensation algorithms ensure measurement accuracy remains unaffected by ambient temperature fluctuations. The low-profile form factor (thickness <3.5mm) facilitates embedded installation, particularly suitable for space-constrained application scenarios.
Equipped with intelligent signal processing units, the sensors support real-time data output and historical trend analysis. With a measurement range of 0-±2000 W/m² and resolution down to 1 W/m², the devices achieve response times under 5 seconds. The IP65-rated housing ensures stable operation across a broad temperature range from -40℃ to +85℃, adaptable to diverse indoor/outdoor working conditions.
Typical applications include: thermal performance testing of building envelopes, insulation effectiveness evaluation for industrial pipelines, and heat exchange efficiency analysis in renewable energy systems. Integrated calibration accessories enable on-site verification, while compatibility with digital management platforms allows remote monitoring capabilities. Through optimized manufacturing processes, the product series demonstrates enhanced durability with mean time between failures exceeding 30,000 hours, while maintaining exceptional measurement precision.
【产品亮点】
• 自适应环境补偿技术消除测量偏差
• 非侵入式安装减少系统干扰
• 标准化接口支持多种数据采集系统
• 全量程线性度误差<±1.5%
• 低功耗设计延长连续工作时间
【Key Features】
• Environment-adaptive compensation technology
• Non-invasive installation minimizes system interference
• Standardized interfaces support multi-platform integration
• Full-range linearity error <±1.5%
• Low-power design extends continuous operation duration
（总字数：中文321+英文327=648字）
