仪表交易站点 上海双旭电子有限公司
主营产品:扭矩测试仪厂家,数显式推拉力计厂家,粗糙度仪厂家
首页 | 关于我们 | 新闻中心 | 产品中心 | 品牌中心 | 资料下载 | 汇款中心 | 联系我们
搜索产品:
您的位置:首页 > 产品中心 > ILTC0 115/230V料位开关
 产品导航
 产品详细
ILTC0 115/230V料位开关 
产品名称: ILTC0 115/230V料位开关
产品型号:
产品报价: 0
 
   
 产品详细:

ILTC0 115/230V料位开关

 

产品概述

ILTC0 115/230V阻旋式料位开关是一种用于固态物料(包括粉状、粒状、块状等)的物位检测设备。该产品采用永磁同步电机驱动叶片旋转,当叶片接触物料时会停止转动并输出开关信号,适用于料仓上下限位报警。产品具有结构简单、安装方便、性能可靠等特点,可广泛应用于化工、塑料、水泥、制药、饲料、食品等行业。14

The ILTC0 115/230V rotary paddle level switch is a device for detecting solid materials (including powder, granular, lumpy, etc.). The product uses a permanent magnet synchronous motor to drive the paddle rotation. When the paddle contacts the material, it stops rotating and outputs a switch signal, suitable for upper and lower limit alarms in silos. The product features simple structure, easy installation and reliable performance, widely used in chemical, plastic, cement, pharmaceutical, feed, food and other industries.

技术特点

该产品采用铝合金外壳和不锈钢传动杆,具有防尘、耐腐蚀的特性。独特的三轴承支撑设计和油封结构可防止粉尘渗入,延长使用寿命。扭力大小可根据物料比重调节,叶片过载时马达离合器会自动打滑保护电机。产品提供多种电源规格(115V/230V AC),叶片转速为1转/分钟,适用于密度≥0.5g/cm³的物料。工作温度范围-10℃至+80℃,高温型最高可耐400℃。15

The product adopts aluminum alloy housing and stainless steel drive shaft, featuring dustproof and corrosion-resistant properties. The unique three-bearing support design and oil seal structure prevent dust ingress and extend service life. The torque can be adjusted according to material density, and the motor clutch automatically slips to protect the motor when the paddle is overloaded. The product provides multiple power specifications (115V/230V AC) with paddle rotation speed of 1 rpm, suitable for materials with density ≥0.5g/cm³. Operating temperature range is -10℃ to +80℃, with high-temperature version up to 400℃.

工作原理

当料位低于检测叶片时,电机带动叶片自由旋转;当料位上升至接触叶片时,旋转受阻使主轴产生位移,触发微动开关输出信号。料位下降后,叶片恢复旋转,设备返回检测状态。该机械式检测原理简单可靠,不受物料特性(如粉尘、导电性、粘性等)影响,适用于各种工业环境。611

When the material level is below the detection paddle, the motor drives the paddle to rotate freely. When the material level rises to contact the paddle, the rotation resistance causes the main shaft to displace, triggering the micro switch to output a signal. After the material level drops, the paddle resumes rotation and the device returns to detection state. This mechanical detection principle is simple and reliable, unaffected by material characteristics (such as dust, conductivity, viscosity, etc.), suitable for various industrial environments.

应用领域

产品主要应用于料仓、溜槽、输送设备等场景的料位监测,可连接声光报警器或PLC系统实现自动化控制。在电力、煤炭、冶金等行业中,用于原煤仓、混煤筒仓、渣库等部位的堵塞检测和料位报警。侧装或顶部垂直安装方式灵活,配备不同长度延长杆(最长1500mm)可适应各种安装需求。1620

The product is mainly used for level monitoring in silos, chutes and conveying equipment, and can be connected to audible-visual alarms or PLC systems for automated control. In industries such as power, coal and metallurgy, it is used for blockage detection and level alarms in raw coal bunkers, mixed coal silos, slag bins and other locations. Flexible side-mounted or top vertical installation methods, with extension rods of different lengths (up to 1500mm) can adapt to various installation requirements.

产品优势

  1. 马达性能可靠,可长时间连续运转;
  2. 独特油封设计防止粉尘渗入;
  3. 扭力稳定可调,适应不同比重物料;
  4. 叶片过载保护机制避免设备损坏;
  5. 结构紧凑,安装维护简便;
  6. 多种规格桨叶和延长杆可选。1216

Product advantages:

  1. Reliable motor performance for long-term continuous operation;
  2. Unique oil seal design prevents dust ingress;
  3. Stable and adjustable torque for materials of different densities;
  4. Paddle overload protection mechanism prevents equipment damage;
  5. Compact structure for easy installation and maintenance;
  6. Multiple specifications of paddles and extension rods available.

ILTC0 115/230V料位开关

阻旋料位开关产品原理:阻旋料位开关是一种用于固态物料(包括粉状、粒状、块状、胶状等)的物位控制器。其利用永磁电机带动叶片旋转,当被检测物料上升至叶片位置时,叶片转动受阻,该阻力通过传动轴传递到接线盒内的检测装置,检测装置则向外输出一个开关信号,并切断电机电源使叶片停止转动。当物料下降时,叶片阻力消失,检测装置便依靠弹簧的拉力恢复到原始状态,叶片恢复旋转状态。在化工、塑料、钢铁、电力、水泥、制药、饲料、食品等行业得到了的应用。

SR2-10-185当涂电厂用阻旋式料位开关

 产品特点:·     

  进口马达,可长时间连续运转;·       油封设计可以防粉尘沿轴渗入;·       扭力,且扭力大小可以调节;·       叶片承受过重负荷时,马达回转机构会自动打滑,保护不受损坏;·       接续规格、叶片、长度皆可接受定制。技术参数: ·       电源: (A)110VAC  (B)220VAC  (C)24VAC·       接点容量:5A/250VAC SPDT·       功率:4W·       介电强度: 1500VAC×1min·       叶片转速:1rpm·       防护等级:IP65·       入线口规格:1/2″PF·       适用小比重:0.3g/ cm3·       温度:-20~80℃(高温型耐350℃)·        标准螺纹型」o  接续:1″PFo  适合水平安装o  接续及牙口至叶片长度可定制·  

ILTC0 115/230V料位开关

 

ILTC0 115/230V料位开关

 

ILTC0 115/230V料位开关

 

塑壳配电保护CDM6I-250L/3208 200A

 

塑壳配电保护CDM6S-800M/4328B 700A 固定式板后接线

 

塑壳配电保护CDM6I-400M/4300B 315A

 

BC-8

 

塑壳断路器XT2L160 LS/I R63 WMP 4P

 

塑壳断路器CPX45-44F

 

 


上一篇 ULZB-1L料位开关 http://www.shuangxudianzi.com/product/d167463.html

 

相关产品
ULZB-1L料位开关
RD-11S-800料位开关
JSDC-YCKG料位开关
TCZX-80料位开关
EXLVG-S/F料位开关
BS-R10A/B/C料位开关
LW18-1GYM料位开关
SH-40BG(250)料位开关
WR10-K料位开关
61-PEEK料位开关

联系我们

电话:021-63510720仪表     63515605气动  63515606电器    63504668自动化仪表  

传真:021-63510720

地址:上海市江桥张掖路355号电子商城6号楼8层 

邮编:200001

地址:上海市江桥张掖路355号电子商城6号楼809室www.shanghaiybw.com  www.shuangxudianzi.com  www.yqybjyw.com  www.13818327383.com www.shanghaiyiqi.com 

 询价留言:
  您的姓名:
  您的单位:
  您的电话:
  您的手机号:
  在线QQ号码:
  E-mail:
   留言内容:
     
ICP备案号:沪ICP备09002683号-10 营业执照

沪公网安备 31011402001945号